Aspire EVO75 Kit Review
NX75 Mod + EVO Tank = Aspire EVO75 Kit
The latest premium vaping kit from Aspire is none other than EVO75. This kit offers more fun vaping experience and it’s suitable whether you are a beginner or a pro. It has amazing features with an easy top-fill design. The Aspire EVO75 Kit includes the Aspire NX75 Box Mod and the Atlantis EVO Sub-Ohm Tank. The NX75 is built with a die-cast zinc alloy that gives it a clean and durable fit and finish. It is available in black, white and stainless steel finish. The overall texture is smooth and a little glossy. The whole set up weighs at 250g.
Navigation and Usage
There is a very straight forward navigation due to the 0.86 OLED screen with two extra buttons. The 8mm square fire button gets you straight to the vapor with a quick response and minimal firing delay. The W (Wattage Modes) and T (Temperature Modes) buttons can be found below the fire button and the (+) and (-) buttons are located below the display screen.
The NX75 Box Mod has sharp lines. It features a simple square design with square buttons and a display screen so it’s bringing nothing unique to the table as for its appearance. The 0.86inch OLED screen is not very big but shows all the needed details with better readability. This kit is portable and can be transported easily. Holding the device is just fine, though there are more portable vaporizer and form fitting devices.
The NX75 runs on a single high-rate 18650 battery (not included). The battery compartment is very sturdy and well-built. It also detaches from the rest of the mod. To install batteries, simply insert and slide down the battery from the top to its designated place. Battery orientation markings can be found on the compartment and inside the mod. This kit is equipped with reverse polarity protection to avoid potential battery installation errors. The micro USB plug is located on one side which allows charging the box in an upright position. Firmware is also upgradeable using the Micro USB port.
The Atlantis EVO has 45*22mm size and is available in White, Black or Stainless steel. It has a 2.0ml Pyrex Glass tank to hold your e-juices and comes with a Delrin Drip Tip. No dry hits with great coil life equals an awesome companionship with the NX75 Mod. It has 0.4Ω coils which have larger airflow for greater vapor production and balanced flavor. The NX75 MOd has wattage range of 1w-75W, a 0.86inch LED display, customizable logo and child lock feature.
Aspire EVO75 Performance
NX75 allows 5 Vaping modes. (wattage, Bypass, Temperature Control, TCR and CFBP). This kit is very pleasant to use; Simply press W to switch Wattage, Press T three times to vape in Temp Control Mode with SS coil. The temperature is adjusted in + and -. Stealth Mode is accessible with three clicks of the fire button fire.
The Aspire Atlantis EVO Sub-Ohm Tank is 22mm with a 2ml eJuice capacity. You can increase the capacity to 4ml using your extension glass and adapter. The EVO has an easy top-fill system between the glass and the coil to put your e-juice. A silicone cuff around the top cap is also available and compatible with various colors of the Aspire Cleito Sub-Ohm Tank as well.
- Atlantis Evo Tank (0.4ohm Coil Pre-installed rated at 40-50w)
- NX75 Mod
- USB Cable
- 2ml Replacement Pyrex Tube
- Extra Coil (0.5ohm 35-40W)
- User Manual
- Warranty Card
- Rubber Cuff
The Atlantis EVO is a good quality vaping kit. It’s easy-going, and is good at rendering flavors. Overall, the kit provides everything a beginner and a pro needs. There are plenty of features to check out for more fun and an amazing vaping experience. You may directly purchase your Aspire EVO75 Kit online at Vape Supply Club. E-liquid and Vape Juice wholesale are also available. The small 2ml capacity could discourage some from buying the kit but overall this would be a great addition to any vaping collection.